9
STYLE COLLECTION STYLING IRON
TROUBLESHOOTING
WIRING
WARNING:
If the supply cord is damaged it must be replaced by
the manufacturers service agent or a similarly qualified person in
order to avoid a hazard.
The wires in the mains lead of this styling iron are coloured in
accordance to the following code:
Problem
Possible Cause
Solution / Hint
The appliance
does not switch
on.
The appliance is
not switched on.
Hold your finger on the touch
button for 3 seconds, until the
appliance beeps twice and the
LED screen lights up.
The plug is not
fitted correctly
into wall socket.
Fit the plug correctly into wall
socket.
The wall socket
is damaged.
Connect the appliance to a wall
socket that works properly.
The supply
cord may be
damaged.
The supply cord must be replaced by
an authorised technical assistance
service or by qualified technicians in
order to avoid any hazards.
Smoke comes
out of the hair or
from the appliance
during use.
You have
put products
on your hair
(for example,
mousse, spray
or gel).
This is normal if you use products
to style. Never put any product in
your hair that is not suitable for use
with high temperature appliances.
Do not use gel or wax. Use only
styling products specifically
designed for this purpose.
The results are not
as expected.
You have put too
much hair on the
plates.
Make sure that the locks of hair do
not exceed 50mm of width and
5mm of thickness.
