Wahl TM612, Руководство пользователя

Страница: 14 / 17

TM612
- 27 - - 27 -
E. P
ARAMETER SETTINGS
E.1 Contrast adjustment
In the CONFIGURATION/SETUP menu, you can adjust the display contrast.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
• Select the Contrast field using the navigation keys ( ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ), then confirm.
•
Using the navigation keys (     and ), modify the contrast as required.
E.2 Date and time setting
In the CONFIGURATION/SETUP menu, you can set the time and date.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Date/hours field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Use the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
) to modify the various parameters.
•
Use the navigation keys ( 
 
 and ) to go to the next field.
•
Press VAL to confirm.
TM612
- 28 -
E.3 “Preferences” setting.
E.3.1 Filtering setting.
In the event of noisy measurements, you can filter the latter to make the value displayed on the screen more
stable.
•
Access this menu using the F1 key (configuration menu).
•
Select the Setup field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Filtering field by pressing the F1 key.
•
Four filtering values are available (OFF, 0.5s, 1s and 2s). Select these values using the navigation
keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
).
•
Confirm by pressing the VAL key.
E.3.2 Display resolution setting.
In the CONFIGURATION/SETUP/PREFERENCES menu, you can select the desired display resolution:
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Display resolution field by pressing the F1 key.
Three types of resolution are available: high (.01), medium (.1) and low (1).
•
Select this resolution using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
).
•
Confirm by pressing the VAL key.
E.3.3 Backlight duration setting.
In the same menu ( CONFIGURATION/SETUP/PREFERENCE ), you can control the duration of the backlight
(manual, 10s or 1min). Press the ON/OFF key briefly to turn on the backlight for the selected duration (10s
or 1min). Press it again briefly to start the timing or to turn off the backlight when in manual mode.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Lighting field by pressing the F1 key.
• Choose the manual or timed mode using the navigation keys ( ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ).
•
Confirm by pressing the VAL key.
E.3.4 “Key beeping” setting.
In the CONFIGURATION/SETUP/PREFERENCE menu, you can emit a beeping sound every time a key is
pressed:
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Key beep field using the F1 key.
•
Using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), select the ON or OFF mode then confirm by pressing the VAL
key (if the parameter settings are completed or go to the next field using the F1 key).
E.3.5 Language setting
In the CONFIGURATION/SETUP/PREFERENCES menu, the interface language can be selected from
English, French, German, Italian or Spanish.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Language field using the F1 key.
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), select your desired language then confirm by pressing the
VAL key (if the parameter settings are completed or to go to the next field use the F1 key).