Wahl Sterling 2, Инструкция по эксплуатации

Страница: 7 / 12

7
Sterling 2 Trimmer
WAHL ATTACHMENT COMBS
To attach the combs, hold comb with teeth up and snap it firmly to the
bottom of the clipper blade. For uniform cutting, allow the trimmer to cut
its way through the hair. Do not force it through at a faster rate.
REMOVING AND CLEANING THE BLADES
To remove the blades, hold the clipper firmly in one hand. Using the thumb
of your other hand, simply push the blades away from the front of the
trimmer. The blades and the mounting plate behind them will all come off
in one piece. To remove hair from between the blades, use the cleaning
brush provided. Be sure to use Wahl clipper oil between the blades before
use.
Before replacing the blades on the trimmer, make sure that the two spring
wires are firmly seated, your clipper will not function properly and may
make a very loud noise. To replace the blades, place the notches at the
bottom of the blade mounting plate into the space provided on the trimmer
housing. Once this is seated, simply push downward on the upper part of
the blade mounting you will hear a click when the blades are fully in place.
Trimmer blades should be oiled every few haircuts.