Wahl Sterling 2, Инструкция по эксплуатации

Страница: 10 / 12

10
Sterling 2 Trimmer
WIRING
WARNING : IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED
BY THE MANUFACTURERS SERVICE AGENT OR A SIMILARLY QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD.
This product must only be used with the transformer supplied. Should a
replacement be required contact wahl customer services on 01227 744330
The wires in the mains lead of this Wahl Hair Trimmer are coloured in
accordance to the following code:
Blue Neutral (N) Brown live (L)
If the plug supplied is not suitable for your socket or becomes damaged,
it should be cut off and disposed of, and a suitable plug fitted as detailed
below:
As the colours of the wires in the mains lead of this Trimmer may not
correspond with the colour markings identifying the terminals in your plug
proceed as follows:
The wire which is coloured BLUE must be connected to the terminal in the
plug which is marked with the letter ‘N’ or coloured BLACK or BLUE
The wire which is coloured BROWN must be connected to the terminal in
the plug which is marked with the letter ‘L’ or coloured RED or BROWN
NEITHER WIRE MUST BE CONNECTED TO THE EARTH TERMINAL OF
A THREE-PIN PLUG. ANY ERROR IN CONNECTING THE APPLIANCE
INVALIDATES THE GUARANTEE.
If a 13 amp (BS 1363) plug is used, a 3 amp fuse must be fitted. If any
other type of plug is used, a 5 amp fuse must be fitted either in the plug or
adaptor at the distribution board. Replacement fuses should be approved
to BS 1362
Fuse cover must be refitted when changing the fuse. If fuse cover is lost,
the plug must not be used until a replacement is obtained. Information for
obtaining the correct fuse is marked on the carrier itself and in the bottom
of the fuse cavity in the plug. These may be obtained from Wahl (UK) Ltd.