12
Lithium Ion Trimmer
2. For the top of the head, cut with the grain using the individual guide comb
attachments. The smaller the number of the comb, the shorter the cut. Comb
or brush the hair as you cut for an even end result.
3. To complete the fade, blend the hair at the fade line by trimming up and out
across the line and against the grain all the way around the head. Then,
repeat all around, turning the trimmer upside down and cutting downward.
The final objective is to blend the hair so there is no real line, just a perfect
fade from bald to very short hair. You can achieve this by using the #1
individual guide comb attachment. Continue combing and cutting until you
achieve the desired effect.
4. To create a part, pick a spot off-center. Pull the scalp tight and with the
end of the blade perpendicular to the head, move the trimmer back and forth
to cut a line. Comb through it and cut again to make sure the cut is precise.
TRIMMING WITH ATTACHMENT COMBS
Your Trimmer includes three trimming attachments; stubble, medium and long.
The stubble guide has 1 bar, the medium-cut attachment
has two bars and the long-cut attachment has three bars.
These attachments are ideal for blending, tapering and
defining beards, as well as for achieving a “close trim”
stubble look around the face. To use the attachments, go
with the hair direction.
To achieve closer looks, go against the hair direction.
1
2
3
