11
Lithium Ion Trimmer
TRIMMING PRIVATE AREAS with the trimmer &
detailer head.
1. Volume reduction using trimmer head. Attach guide comb and select a long
trimming length. Begin trimming, starting at the top and working down. Use
progressively closer settings to get the “look” and length you prefer.
2. For hard to reach or tight areas, use the detailer head. Always pull skin taut.
Then slowly move the detailer through area to trim until desired look is
accomplished.
3. Shave in your private areas by gently shaving in the desired area and always
keep the skin taut.
Trimming Nose Hair using detailer head.
Make sure the nasal passages are clean. Slowly move the detailer in and out of
each nostril, no more than 1/4-inch deep.
Trimming EAR Hair using detailer head.
Make sure the outer areas of the ears do not contain any wax. Hold the ear flat
with one hand and carefully insert detailer no more than 1/4-inch into the outer
ear.
CAUTION: Do not insert the detailer or any other foreign object into the inner
ear. For hair growing on the outside of the ear, simply move the detailer slowly
along the edges of the ear.
Trimming Eyebrows using detailer head.
Slowly move detailer to neatly trim stray hairs. For precise, even trimming,
slowly move the detailer closer or farther away from eyebrows to achieve
desired length. Do not press against brow as it may remove too much hair.
FADE CUT using a T-Blade
Start at the temple and cut all the way around the head to establish the ultimate
location of the fade line. Always cut against the grain for the shortest cut. Don’t
force the blade through the hair. Let the trimmer do the work.
1. Next, cut around the head again and up the nape of the neck to the fade line,
brushing away the cut hair as you go. Pull the scalp taut with the thumb
for the closest cut. Turn the trimmer upside down when necessary to keep
cutting against the grain. Make sure both sides of the head are even.
