WAGO PERSPECTO® 762
Device Description 19
762-3057/000-001 CP 57 QVGA TV
Manual
Version 1.2.1
3.3.4
X5 – CAN 0 Interface
This interface is designed as an RJ45 connector. The interface is used to
communicate with CANopen-enabled modules.
The CAN 0 interface is designed with electrical isolation in accordance with ISO
11898. A terminating resistor that can be switched on by relay is integrated in the
device in accordance with ISO11898.
The connected data cable must be shielded.
Figure 6: Connector X5 – CAN 0 Interface RJ-45
Table 8: X5 Pin Assignment
Pin
Assignment
Function
1
CAN_L
CAN data low dominant
2
CAN H
CAN data high dominant
3
GND
Ground
4
-
Not used
5
Do not use!
Not used
6
Do not use!
Not used
7
-
Not used
8
-
Not used
Содержание WAGO-PERSPECTO 762 Series
Страница 49: ...WAGO PERSPECTO 762 49 762 3057 000 001 CP 57 QVGA TV Manual Version 1 2 1 ...
Страница 50: ......