WAGO SPEEDWAY 767 Series Скачать руководство пользователя страница 53

Страница: 53 / 102

WAGO-SPEEDWAY 767

Parameterizing

767-5803/000-800 8DIO 24V DC 0.5A IF (8xM12)

Manual

Version 1.1.0

Pos: 29 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Inbetri ebnehmen - Konfigurier en - Parametri eren - Bedienen/Parametrier en - Überschrift 1 @ 3\mod_1223554593484_21.docx @ 23717 @ 1 @ 1

Parameterizing

Pos: 30.1 /Serie 767 (WAGO-SPEED WAY)/Par ametrieren/I/O-M odule/Parametri erung 767- xxxx allgemei n @ 5\mod_1249376935062_21.docx @ 40257 @ @ 1

All parameters listed here can be set using WAGOframe (or another FDT/DTM

frame application) for the module.

If you use a fieldbus for the parameterization, only certain parameters are

configurable, depending on the type of fieldbus.

Changing parameters!

When parameters are incorrectly modified via FDT/DTM frame application (e.g.,

WAGOframe), machine components could be placed in a dangerous state and

personnel and machines could be at risk.

Before changing the parameters, ensure that the machine components are in a safe

and defined state and switch off the higher-level controller.

Also ensure before start-up that no personnel remain in the danger area of the

machine components.

For the parameterization of the module, an appropriate DTM is available. Via this

DTM, you can parameterize the module either online or offline. The offline mode

enables the parameterization of a module that is not yet present. In the offline

mode, first store the parameters in a project and later transfer them to the module.

In the online mode there is a direct link between the display and the connected

module. If the module is in the online mode, its name is displayed in

bold

and

italic

font in the network window.

Detailed informations.

Detailed information on handling WAGOframe can be found in the fieldbus

coupler manuals.

The following sections provide information on the parameters and their

descriptions.

Содержание SPEEDWAY 767 Series







































































































Результаты поиска

Содержание SPEEDWAY 767 Series

Отзывы:

Похожие инструкции для SPEEDWAY 767 Series

Бренды по названию

Популярные бренды

WAGO SPEEDWAY 767 Series, Руководство пользователя

Результаты поиска

Содержание SPEEDWAY 767 Series

Отзывы:

Похожие инструкции для SPEEDWAY 767 Series

Бренды по названию

Популярные бренды