10 Important Notes
WAGO Industrial Switches
852-1417 Industrial Eco Switch
Manual
Version 1.2.1
2.1.4
Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
•
Repairs,
•
Changes to the hardware or software that are not described in the
operating instructions,
•
Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO Kontakttechnik GmbH & Co. KG.
2.1.5
Standards and Regulations for Operating the Industrial
Switches
Please observe the standards and regulations that are relevant to installation:
•
The data and power lines must be connected and installed in compliance
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
•
For installation, startup, maintenance and repair, please observe the
accident prevention regulations of your machine (e.g., DGUV Regulation
“Electrical Installations and Equipment”).
•
Emergency stop functions and equipment must not be deactivated or
otherwise made ineffective. See relevant standards (e.g., EN 418).
•
Your installation must be equipped in accordance to the EMC guidelines so
electromagnetic interferences can be eliminated.
•
Please observe the safety measures against electrostatic discharge
according to EN 61340-5-1/-3. When handling the modules, ensure that
environmental factors (persons, workplace and packing) are well grounded.
•
The relevant valid and applicable standards and guidelines regarding the
installation of switch cabinets must be observed.
