852-1328
Configuration in the WBM
44
Product manual | Version: 1.2.0
Industrial Managed Switch
10.4.5.2 Fiber Port Speed Setting
Figure 30: WBM “Configuration” Page – “Fiber Port Speed Setting” Tab
The description of each parameter and its default value in Fiber Port Speed Setting tab
page are summarized in Table “WBM “Configuration” Page – “Fiber Port Speed Setting”
Tab”.
Table 21: WBM “Configuration” Page – “Fiber Port Speed Setting” Tab
Parameters
Factory Default
Description
Ports
-
Fiber port number on the industrial managed switch. The user can
click on the dropdown list to select either Port 7 or Port 8.
Speed
1000
The user can change the port speed as either 1000 Mbit/s (1 Gbit/
s) or 100 Mbit/s from the drop-down list. Click the
[Submit]
button
to apply the speed change.
10.4.6 Interface – Port Mirroring
10.4.6.1 General Information
Port-based mirroring is used on a network switch to send a copy of the network packets
sent or received by one or a range of ports to a network monitoring system connected to
another port (monitor port).
This is often used for network devices that require monitoring of network traffic, such as
an intrusion detection system (IDS).
Port mirroring, together with a network traffic analyzer, assists in monitoring network traf-
fic. Users can monitor the selected ports (source ports) for egress and ingress packets.
