72 Configuration in the WBM
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
Table 35: WBM “Security” Page – “802.1X” – “802.1X Parameter Setting” Tab
Parameters
Factory Default Description
Quiet Period
60
Waiting time before a new request can be submitted after the
authorization failed. The range is from 10 to 65535 seconds.
Tx Period
15
Waiting time for the supplicant’s EAP response before
retransmitting another EAP request. The range is from 10 to
65535 seconds
Supplicant
Timeout
30
Waiting time for the supplicant to respond to the
authentication server’s EAP packet. The range is from 10 to
300 seconds.
Server Timeout
30
Waiting time for the authentication server to respond to the
supplicant’s EAP packet.The range is from 10 to 300
seconds.
Maximum
Requests
2
The maximum number of the retransmissions that the
authentication server can send the EAP request to the
supplicant before the authentication session times out. The
range is from 2 to 10 times.
Reauth Period
3600
Time between the periodic re-authentication of the
supplicant. The range is from 30 to 65535 seconds.
7.6.3.3 IEEE 802
.
1x Port Setting
The user can configure the 802
.
1x security mechanism on each port of the
WAGO secure switch as shown in Figure “WBM “Security” Page – “802.1X” –
“802.1X Port Setting” Tab”.
Each port can be set for any of the four authorization
modes which are Force Authorization (FA), Force Unauthorization (FU), IEEE
802
.
1X Standard Authorization (AU), and no authorization (NO
(
,
as described in
Table “WBM “Security” Page – “802.1X” – “802.1X Port Setting” Tab”.
