WAGO-SPEEDWAY 767
Service
67
767-4801/000-800 8DO 24V DC 0.5A IF (8xM8)
Manual
Version 1.1.0
Pos: 55 /Serie 767 ( WAGO-SPEED WAY)/Ser vice/I/O-M odule/Ser vice 767- xxxx allgemein 4 @ 5\mod_1249471383765_21.docx @ 40467 @ 332 @ 1
10.2.4 Removing the Module from the Profile Adapter
If the module is mounted on a profile adapter, proceed with the removal as
follows:
1. Disconnect the power supply from that part of the system on which you
have mounted the module before attempting to remove it.
2. Unscrew the screws on which the nuts are fastened and remove the module
from the profile rail of your system.
3. Unscrew the screws that connect the module with the profile adapter.
10.2.5 Connecting the Module
To connect the module, proceed as described in Sections 4 through 6. If
necessary, the parameters of the previous module are transferred to the new
module, depending on the type of fieldbus coupler being used. For more
information, see section "Parameterizing" > "Automatic Storage of System
Parameters".
10.3 Disposal
Do not dispose of the 767 Series components in the household waste; observe the
laws which apply to them. You can also contact a certified waste management
company.
Pos: 56 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
