72
Parameterizing
WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
Manual
Version 2.0.0
Table 35: Configuring the GPS settings
GPS standby
GPS standby
Click the
[Use]
button to operate the GPS receiver in standby
mode to save power. You can enter the power-on and power-
off times in the following fields.
GPS activation
time
In this box, enter the power-on time of the GPS receiver.
GPS deactivation
time
In this box, enter the power-off time of the GPS receiver.
Alarm settings
Radius
In this field enter the permissible radius in 100-meter steps
around the starting point which, when exceeded, will result in
a message being sent.
Start text
In this field enter the text to be contained in the message
transmitted when the telecontrol module is switched on.
Alarm text
In this field enter the text to be contained in the message
transmitted when the permissible radius is exceeded.
Address
Use this button to select the addresses to which the message
is to be transmitted when the permissible radius is exceeded,
or when the telecontrol module is switched on.
Click the button
[Internet]
for applications with GPRS
transmission.
Pos : 34.36 /D okument ati on allgemei n/Gli ederungsel ement e/---Seit enwec hs el--- @ 3\ mod_1221108045078_0. doc x @ 21810 @ @ 1
