WAGO-TO-PASS® 761
Value Script FW 2.20 (Standard)
99
761-112 Telecontrol Module Compact, Web
Manual
Version 2.0.0
10.2.4.2.1 Logger Script FW 2.33 (Counter Inputs)
The counter inputs have resulted in counter data and an indicator being added to
the display for non-set time (operating hours) to the logger script ("LV=02.01").
Example:
&HT=1
(same as for Value Script)
&LCD2=0;0;e;20F5800;d;0;0;0
10.2.4.2.2 Data Format of an LCDx Variable
Table 44: Data format, logger script extension, Variable LCDx
Index Contents
Format
0
Counter status 1st input
Status 1
1
Counter value 1st input, hexadecimal Value > 8
2
Counter status 2nd input
Status 1
3
Counter value 2nd input, hexadecimal Value > 8
4
Counter status 3rd input
Status 1
5
Counter value 3rd input, hexadecimal Value > 8
6
Counter status 4th input
Status 1
7
Counter value 4th input, hexadecimal Value > 8
The counter status can assume the statuses indicated by the transmitted SMS:
Table 45: Counter status
Status Explanation
0
Digital input not configured as a counter.
e
Counter is active.
d
Counter is not active.
o
Counter overflow.
r
Counter has been reset.
s
Counter has been started.
c
Counter value has been changed.
The counter status shows the last change that has occurred since the last logger
script transmission, or after a system start (independent of the SMS and value
status).
&HT=1: (value always 1) the device time has not been set (&TI entry is operating
hours information, started on 01.01.00 at 00:00:00), otherwise this entry is not
present.
