8
•
AS-Interface Components
AS-Interface Module IP20
WAGO-I/O-SYSTEM
751
AS-Interface Components IP20
2 AS-Interface Components
2.1 AS-Interface Module IP20
2.1.1 751-5702 [AS-Interface Module 4IN/3OUT 24V/2A A/B]
Digital I/O-Module 4 IN / 3 OUT 24 V / 2 A A/B
2.1.1.1 View
751-5702
4IN 24V-3OUT 24V 2A
O3 O2 O1
AUX
S 7.A.E
I4
I3
I2
I1
ASI
FLT
X8
X6
X1
X3
X2
X4
X7
X5
NTERFACE
Status
inputs
Status
outputs
Status
AS-interface,
AUX supply
Error
Sensor connectors
Actuator connectors
AS-interface and
AUX connectors
Programming device
connector
Fig. 2.1.1-1: View
gq57020e
2.1.1.2 Description
The AS-Interface module 751-5202 is an economical solution for a fieldbus-
independent and flexible connection of actuators and sensors from the field
and the control cabinet. The module is in accordance with AS-Interface
specification V.3.0.
The module works in extended address area and can be set to one of 62
addresses ranging from 1A ... 31A resp. 1B … 31B.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The voltage for the actuators is supplied via the AUX black cable.
The AS-Interface module 751-5202 provides 4 digital 24 V inputs and 3
digital 24 V / 2 A outputs.
Sensors, actuators, AS-Interface power supply and actuator supply are
connected using connectors from the WAGO Multi Connection System Mini.