30 List of Figures
WAGO I/O System 750
750-940 EnOcean RS-485 Gateway; 868 MHz
Manual
Version 1.3.0, valid from FW/HW Version 01/01
Pos: 57 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 1/Funktionsbeschreibung - Überschrift 1 @ 4\mod_1239025975389_21.docx @ 30003 @ 1 @ 1
4
Function Description
Pos: 58 /Serie 750 (WAGO I/O SYSTEM)/Funktionsbeschreibung/Funktionsbeschreibung 750-0940 - Betriebsarten @ 36\mod_1588779092039_21.docx @ 581782 @ 2332333333322 @ 1
The EnOcean Gateway can be configured for different applications via DIP
switches:
•
As EnOcean Gateway in ESP3 mode
•
As EnOcean Gateway in Modbus mode
•
As repeater in an EnOcean network
The functions are activated or deactivated as called for by the respective
application via DIP switches; see Section “Operation Elements.”
A separate power supply is needed to operate the EnOcean Gateway.
Observe intended use
The EnOcean Gateway 750-940 must not be used in any relation with equipment
that supports, directly or indirectly, human health or life or with applications that
can result in danger for people, animals or real value.
This arises from the module's ranking as Class 2 Equipment per ETSI EN 301
489-3 V2.1.1 (2019-03) “Specific conditions for short-range devices (SRD).”
