WAGO 750-469 Скачать руководство пользователя страница 14

Страница: 14 / 62

Device Description

WAGO-I/O-SYSTEM 750

750-469 2AI Thermocouple

Manual

Version 1.1.0

Device Description

The 750-469 (2AI Thermocouple) analog input module and its 750-469/xxx-xxx

variations allow thermocouples be measured in the field. It can also be used to

measure voltages (mV). Depending on the operating mode, the voltage value is

converted to a temperature or is directly send out by the module.

A microprocessor within the module is used for converting and linearizing the

measured voltage value into.

The

WAGO-I/O-

CHECK

commissioning tool can be used to configure the

required operating mode. The I/O module can also be parameterized via

PROFIBUS and PROFINET device description (GSD file).

The parameterization description can be found in the appendix in Section

“Configuration and Parameterization via GSD File with PROFIBUS DP and

PROFINET IO.”

The analog module has 2 input channels allowing the direct connection of 2

thermocouples.

For example, 2 thermocouples can be connected either to the CAGE CLAMP

connTC 1 and −TC 1 or to +TC2 and −TC 2.

The shield connection is fed directly to the carrier rail and contact is made

automatically by snapping the module onto the rail.

The field voltage and the system voltage are electrically isolated from each other.

The operational readiness and the trouble-free internal data bus communication of

the channels are indicated via a green function LED.

A red fault LED per channel indicates a wire break or that the signal is outside the

measuring range.

Use a supply module!

Use a supply module for field-side power supply of downstream I/O modules.

The I/O module 750-469 can be used with all fieldbus couplers/controllers of the

WAGO-I/O-SYSTEM 750 (except for the economy types 750-320, -323, -324

and -327).

With consideration of the power jumper contacts, the individual modules can be

arranged in any combination when configuring the fieldbus node. An arrangement

in groups within the group of potentials is not necessary.

Содержание 750-469































































Результаты поиска

Содержание 750-469

Отзывы:

Похожие инструкции для 750-469

Бренды по названию

Популярные бренды

WAGO 750-469, Руководство пользователя

Результаты поиска

Содержание 750-469

Отзывы:

Похожие инструкции для 750-469

Бренды по названию

Популярные бренды