WAGO 2 AI 4-20 mA S.E. Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 52

background image

WAGO-I/O-SYSTEM 750

Notes about this Documentation

5

753-466 2 AI 4-20 mA S.E.

Manual

Version 1.5.0

Pos: 7 /Alle Serien (Allgemeine M odul e)/Überschriften/Ebene 1/Hinweise zu dieser D okumentati on - Überschrift 1 @ 4\mod_1237987661750_21.docx @ 29029 @ 1 @ 1

1

Notes about this Documentation

Pos: 8 /Alle Serien (Allgemeine M odul e)/Sicher heits- und sonstige Hinweise/Hinweis/Hi nweis: D okumentation aufbewahr en @ 4\mod_1237987339812_21.docx @ 29026 @ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 9 /Alle Serien (Allgemeine M odul e)/Überschriften/Ebene 2/Gültig kei tsbereich - Überschrift 2 @ 12\mod_1338912448776_21.docx @ 96469 @ 2 @ 1

1.1

Validity of this Documentation

Pos: 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweise zur D okumentati on/Gültigkeitsbereich/Gültig keitsber eich Dokumentation I/O-Modul 750- xxxx, nur Standardversion @ 14\mod_1358944037400_21.docx @ 109342 @ @ 1

This documentation is only applicable to the I/O module 753-466

(2 AI 4-20 mA S.E.).

Pos: 11 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweise zur D okumentati on/Hi nweise/Achtung: Hinweis zur D okumentati on I/O-Modul e 750- xxxx @ 4\mod_1237986979656_21.docx @ 29023 @ @ 1

The I/O module 753-466 shall only be installed and operated according to the

instructions in this manual and in the manual for the used fieldbus

coupler/controller.

Consider power layout of the WAGO-I/O-SYSTEM 750!

In addition to these operating instructions, you will also need the manual for the

used fieldbus coupler/controller, which can be downloaded at

There, you can obtain important information including information on electrical

isolation, system power and supply specifications.

Pos: 12.1 /All e Seri en ( Allgemei ne Module)/Ü berschriften/Ebene 2/Ur heberschutz - Ü berschrift 2 @ 23\mod_1435647042188_21.docx @ 184808 @ 2 @ 1

1.2

Copyright

Pos: 12.2 /All e Seri en ( Allgemei ne Module)/R echtliches, Allgemei nes/Urheberschutz ausführlich @ 4\mod_1235565145234_21.docx @ 27691 @ @ 1

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 12.3 /Dokumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

«
...
3
4
5
6
7
...
»

Содержание 2 AI 4-20 mA S.E.





















































Отзывы:

Нет отзывов

Похожие инструкции для 2 AI 4-20 mA S.E.

Бренд: Zolix Instruments Страницы: 22

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

Бренд: Febco Страницы: 12

Бренд: HANYOUNG NUX Страницы: 36

Бренд: HANYOUNG NUX Страницы: 4

Бренд: MADRIX Страницы: 91

Бренд: MADRIX Страницы: 36

Бренд: MADRIX Страницы: 40

Бренд: YASKAWA Страницы: 18

Бренд: Uclear Страницы: 40

Бренд: Saab Страницы: 4

Бренд: TCS Страницы: 16

Бренд: Vanderbilt Страницы: 2

Бренд: LLURIA Страницы: 2

Бренд: PESA Страницы: 30

Бренд: Centurion Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды