WAGNER WallPerfect HandiRoll 550, Руководство пользователя

Страница: 18 / 20

12
HandiRoll 550 GB
Locking cap
Retaining disk
Duckbill valve
Valve housing
Connecting
area
Unscrew the locking cap on the valve housing by 1)
turning counterclockwise.
Remove the retaining disk and the duckbill from 2)
the valve housing
Clean these parts thoroughly using the appropriate 3)
cleaning solution
Replace the duckbill valve and retainer disk. 4)
Screw the locking cap on the valve housing by 5)
turning it counterclockwise.
Parts list (Fig. 19)
Item description Part no. Qty.
1,3 Roller core and cap* 2325720 1
2 Roller cover 12 mm 2333285 1
4,5,6 Seal, roller arm and O-ring* 2325740 1
4,6 Seal and O-ring 2325742 1
7 O-ring 2326966 2
8,9,10 Locking cap, retainer disk, duckbill valve* 2325721 1
11,12 Suction system* 2325746 1
* denotes parts that can only be purchased together and not individually.
nOtICE: If after extended use you find the plunger difficult to pull while filling, apply
a generous amount of petroleum jelly around the o-rings located at the end of the
plunger. We have included a packet of petroleum jelly for you convenience.
Important note regarding Product liability !
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product
only if all parts originate from or were approved by the manufacturer and the devices
are assembled and operated correctly. The use of other accessories and spare parts can
partially or completely invalidate the liability.