D
57
WallPerfect Flexio 995
Var
nish pain
ts and glaz
es
G
ener
al
GB
57
WallPerfect Flexio 995
Problem
Cause
Remedy
Poor covering
capacity on the wall
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
➞
The material you are
spraying should be at
room temperature
➞
Cross spray (Fig. 11)
➞
Closer to the object
27.
Maintenance
Check the air filter (fig. 30, 1) after use and
replace depending on how soiled it is.
Insert a new air filter (order no. 2310 812) and
replace the lid (2).
i
WARNING!
Never operate the
machine without the air filter;
dirt could be sucked in and
interfere with the function of
the machine.
To make assembly easier, apply lubricant
(enclosed) to the specified areas after
cleaning (fig. 31).
28.
Storage
i
After assembly, the air pipe
and grab handle can no
longer be separated.
Do not try to disassemble
them by force!
•
Store the device only when cleaned
properly.
•
Release the pull wire.
•
Release the trigger stop.
1
2
