8
W14/W15/W16
EN
Correction of Malfunctions
Malfunction
Cause
Remedy
The steam
wallpaper stripper
is not working
•
Heating element covered in
limescale
•
Too little water in tank. A safety cut
out is fitted to prevent overheating
of element if there is little water in
tank
•
Unit at an angle, heating element is
not in water
➞
Clean
➞
Fill with more water.
Wait 2 minutes. Refill
will reset the cut-out
element
➞
Move unit into
horizontal position
Spare Parts
Pos�
Name
Order No�
1
Mains lead UK
2353930
2
Mains lead AUS/NZ
2354141
3
Steam hose
2352913
4
Steamplate
2353928
5
Steamplate small
2354013
6
Scraper
2354142
7
Filler cap
2382323
Environmental protection
The appliance and all accessories and packaging have to be recycled in
an environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Please pay special attention to the instructions on the product packaging.
Important Note regarding Product Liability!
In accordance with an EC directive, the manufacturer is liable for this product only
if all parts originate from or were approved by the manufacturer and the tools are
assembled and operated correctly. The use of other accessories and spare parts can
partially or completely invalidate the liability.
