![WAGNER SuperCoat 0556730W Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/wagner/supercoat-0556730w/supercoat-0556730w_operating-manual_4516949024.webp)
22 SuperCoat
GB
Servicing
8.3
Servicing the Fluid Pump Assembly P/N 155-559
1
2
21
3
5
6
18
14
15
22
19
16
7
8
9
10
11
12
13
20
17
4
i
The following procedure must only be
performed by a Wagner Authorized Service
Center.
Attention
use of non-Wagner manufactured service parts
may void warranty.
The 155 Series Pump should receive a routine servicing after
approximately 1000 hours of use or earlier if there is excessive
leakage from the top packing, or if pump strokes become faster
on one stroke or another. The use of Wagner EasyGlide Part #
0508619 is recommended as an upper packing lubricant. DO
NOT SUBSTITUTE oil, water or solvent for an upper packing
lubricant.
Disassembly Procedure
1. Test pump before disassembly. Follow test procedure in
Troubleshooting Guide - Fluid Section.
2. Loosen the four screws that secure the shield assembly
to the plate. Loosen the two screws that secure the two
halves of the shield together and remove the shield.
3. Remove siphon hose assembly. Remove stanchion nuts
(1) and washers (2).
4. Hold the air motor piston rod (3) at the wrench flats and
unthread coupling nut (4) to separate pump from motor
Attention
Never use a pipe wrench, pliers, etc. on the
chrome part of hydraulic, air or fluid section
rod.
5. Remove coupling nut (4) on connecting rod (5). Remove
connecting rod (5) from displacement rod (6).
6. For easier disassembly, unthread and remove foot valve
(7).
7. Remove O-ring (8), ball stop (9), ball cage (10) and ball
(11).
8. Remove cylinder (12).
9. Remove displacement rod (6).
10. Place piston seat (13) in a vise and use a wrench on the
flats to remove the displacement rod (6) from the piston
seat (13).
11. Remove lower packing set (14), spring (15), washer (16),
and ball (17).
12. Remove upper packing spring (18), packing set (19) and
O-ring (20).
Technical Data
Displacement Rod Area
6,3 cm2
Stroke Length
10,2 cm
Displacement Volume /
Stroke
63,9 cm3; 0,064 liter
Displacement Volume / 40
Cycles / 80 Strokes
5113 cm3; 5,113 liter
Motor Selection
700/900 Series
Motor Pump Ratio
45:1 (SC45) / 60:1 (SC60)
0556745W
0556745C
0556960W
0556960C
Содержание SuperCoat 0556730W
Страница 104: ...102 SuperCoat...
Страница 105: ...SuperCoat 103...