GB
15
Renuvo
10. Cleaning
Use a cleaning agent suitable for the material (observe
any information provided by the manufacturer of
the material).
If using solvent-based materials,
use turpentine substitute or a similar material
for cleaning. Flammable materials marked by a
flame icon (
) may not be used. Do not immerse
the application pad or components in cleaning
agents, but rinse them instead.
i
When using water-based materials, we
recommend cleaning with warm water and
detergent.
•
Press the red quick release fastener (fig. 9, a) to
detach the container. Unscrew the lid and pour any
leftover material into the original container.
•
Fill the container with a suitable cleaning agent.
(Fig. 10)
•
Re-insert the container.
Make sure that it engages audibly.
•
Hold Renuvo over an empty bucket.
•
Keep the trigger depressed and move the device
gently to and fro until the container is empty. (Fig.
11)
Slight movements cause any leftover material to
be easily removed from the Renuvo.
•
Remove the application pad and groove brush
and clean all parts thoroughly. (Fig. 12)
•
Remove the container and rinse it thoroughly.
(Fig. 13) Pay special attention to the area around
the valve when cleaning. (Fig. 13, a)
•
Unscrew the cap on the container. (Fig. 14)
a
a
