English
16
ª8BHOFS4QSBZ5FDI"MM3JHIUT3FTFSWFE
Troubleshooting
PROBLEM
CAUSE
SOLUTION
Problem A: Little or no
material flow
/P[[MFDMPHHFE
4VDUJPOUVCFDMPHHFE
.BUFSJBMøPXTFUUJOHUPPMPX
4VDUJPOUVCFMPPTF
"JSWFOUPOTVDUJPOUVCFCMPDLFE
/PQSFTTVSFCVJMEVQJODPOUBJOFS
"JSWBMWFUVCFEJTDPOOFDUFE
"JSöMUFSDMPHHFE
4QSBZNBUFSJBMUPPUIJDL
$MFBO
$MFBO
*ODSFBTFNBUFSJBMøPXTFUUJOH
3FNPWFBOESFQMBDFBTUJHIUMZ
BTQPTTJCMF
$MFBO TFFQBHF
5JHIUFODPOUBJOFS
3FDPOOFDUCPUIFOETPGUIFBJS
UVCF
$IBOHF
5IJO
Problem B: Material
leaking
/P[[MFMPPTF
/P[[MFXPSO
/P[[MFTFBMNJTTJOHPSXPSO
.BUFSJBMCVJMEVQPOBJSDBQBOE
OP[[MF
5JHIUFO
3FQMBDF
3FQMBDF FYUSBTQSPWJEFE
$MFBO
Problem C: Spray pattern
too thick, runs and sags
.BUFSJBMøPXTFUUJOHUPPIJHI
"JSQPXFSTFUUJOHUPPMPX
"QQMZJOHUPPNVDINBUFSJBM
/P[[MFDMPHHFE
"JSöMUFSDMPHHFE
5PPMJUUMFQSFTTVSFCVJMEVQJO
DPOUBJOFS
4QSBZNBUFSJBMUPPUIJDL
%FDSFBTFNBUFSJBMøPXTFUUJOH
*ODSFBTFBJSQPXFSTFUUJOH
"EKVTUNBUFSJBMøPXPSJODSFBTF
NPWFNFOUPGTQSBZHVO
$MFBO
$IBOHF
5JHIUFODPOUBJOFS
5IJO
Problem D: Spray jet
pulsates
.BUFSJBMJODPOUBJOFSSVOOJOHPVU
"JSöMUFSDMPHHFE
"JSWBMWFUVCFEJTDPOOFDUFE
3FöMM
$IBOHF
3FDPOOFDUCPUIFOETPGUIFBJS
UVCF
Problem E: Too much
overspray
(VOUPPGBSGSPNTQSBZPCKFDU
"JSQPXFSTFUUJOHUPPIJHI
3FEVDFEJTUBODF wwJTJEFBM
%FDSFBTBFBJSQPXFSTFUUJOH
Problem F: Pattern is very
light and splotchy
.PWJOHUIFTQSBZHVOUPPGBTU
.BUFSJBMøPXTFUUJOHUPPMPX
"JSQPXFSTFUUJOHUPPIJHI
"EKVTUNBUFSJBMøPXPSEF
DSFBTFNPWFNFOUPGTQSBZHVO
*ODSFBTFNBUFSJBMøPXTFUUJOH
%FDSFBTFBJSQPXFSTFUUJOH
This unit contains no servicable electrical parts. Do
not attempt to service yourself. Store indoors with
the cord wrapped around the turbine handle.
Have you tried the recommendations above and are still
having problems? In the United States, to speak to a
customer service representative, call our Technical Service
at 1-800-328-8251. See www.wagnerspraytech.com in the
“Contact Us” section for Technical Service hours.
*Note:
0OMZUIJOUIFNBUFSJBMBTBMBTUSFTPSUUPJNQSPWFTQSBZ
QFSGPSNBODF0QUJNBMTQSBZQFSGPSNBODFTIPVMECFBDIFJWFE
TJNQMZCZBEKVTUJOHUIFWBSJPVTDPOUSPMTPOUIFVOJU
¡Å¦