WAGNER Paint Crew Plus, Руководство пользователя

Страница: 4 / 20

4 English
Components and Description
ON/OFF Switch
. . . . . . . . . . . The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Spray Gun . . . . . . . . . . . . . . . The spray gun controls the delivery of the fluid being pumped.
Spray Hose . . . . . . . . . . . . . . The spray hose connects the gun to the pump.
Return Tube
. . . . . . . . . . . . . Fluid is sent back out through the return tube to the hopper when PRIME/SPRAY knob is in PRIME
position.
PRIME/SPRAY Knob . . . . . . The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube when set
to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for PRIME and
SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the system (see Pressure Relief
Procedure , page 7).
Pressure Control
. . . . . . . .The pressure control function is also controlled by the PRIME/SPRAY knob. See next page for
diagram. The pressure control regulates the amount of force the pump uses to push the fluid and can
be adjusted for desired spray pattern.
Removeable Hopper
. . . . . .The hopper can be removed for easy emptying and cleaning. It can be removed when empty or when
filled with material.
Do not exceed 2 1/2 gallons. The hopper lid does not seal and material can
leak if hopper is overfilled and tipped.
Controls and Functions
The shipping carton for your painting system contains the
following:
• Spray gun with filter and spray tip assembly
• 25’, 1/4” diameter pressure hose
• Instruction manual
• One axle, two axle plates and four screws
• Two wheel assemblies
• One inlet valve pusher tool*
• Combination push nut / inlet valve removal tool*
*Do not discard. Stored in sprayer base.
Capacity . . . . . . . . . . . . . . . . 2 1/2 gallon removable hopper.
Power Source
. . . . . . . . . . . . 1/2 Hp universal motor.
Power Requirement . . . . . . . 15 amp minimum circuit on 115 VAC, 60 Hz current.
Generator Requirement . . . . 8000 Watt.
Safety Features
. . . . . . . . . . Spray gun trigger lock and pressure diffuser; built-in safety guard; PRIME/SPRAY knob for safe
pressure release.
Capability . . . . . . . . . . . . . .Sprays a variety of paints, oil base latex, primers, stains, preservatives and other nonabrasive
materials, including pesticides and liquid fertilizers.
This pump should not be used with textured
materials, block filler, lacquers, industrial enamels, or asphalt sealer or materials containing
HHC. See coating supplier if flash point is not listed on the container.
Specifications
Components Tools Needed for Assembly
• Two adjustable wrenches
• Phillips screwdriver
• Extension cord (refer to Important Electrical Information
(page 3).
• Rubber or wooden mallet