WAGNER GM 5000EA Скачать руководство пользователя

Страница: 51 / 104

GM 5000EA

B_03268

OPERATING MANUAL

EDITION 04/2016

ORDER NUMBER DOC2344499

7.3.5

CHANGING FROM AIR ROUND JET TO AIR FLAT JET

Defective electrode!

Material damage due to functional faults.

Do not damage the electrode.

NOTICE

Flush spray gun

1. Switch off control unit.
2. Relieve pressure.

Chapter 7.3.4

3. Connect the system to the

fl ushing agent supply.

4. Set product pressure. Close

atomizing air regulator.

5. Thoroughly fl ush out the

spray gun.

6. Relieve pressure.

Chapter 7.3.4

Changing from round jet to fl at jet

7. Unscrew the union nut (2) by hand.
8. Remove AR 5000 air cap (3). Unscrew AR 5000 nozzle (4)

by hand and remove it.

9. Clean the spray gun front carefully with damp cloth. Pay

attention to the electrode (1). Use the protection cap for
the valve needle (8).

10. Screw in and slightly tighten AF 5000 fl at jet nozzle (6) by hand.
11. Put the AF 5000 air cap (5) in place. Screw the union nut (2) onto the spray gun

body.

12. Set the desired fl at jet level with the air cap horns (7) and then slightly tighten the

union nut by hand.

Changing from fl at jet to round jet

7. Unscrew the union nut (2) by hand.
8. Remove AF 5000 air cap (5).
9. Unscrew and remove AF 5000 fl at jet nozzle (6) by hand.

10. Clean the spray gun front carefully with damp cloth. Pay attention to the

electrode (1). Use the protection cap for the valve needle (8).

11. Screw on and slightly tighten AR 5000 nozzle (4) by hand.
12. Position AR 5000 air cap (3). Screw the union nut (2) onto the spray gun body and

slightly tighten by hand.

Содержание GM 5000EA









































































































Результаты поиска

Содержание GM 5000EA

Отзывы:

Похожие инструкции для GM 5000EA

Бренды по названию

Популярные бренды

WAGNER GM 5000EA, Руководство по эксплуатации

Результаты поиска

Содержание GM 5000EA

Отзывы:

Похожие инструкции для GM 5000EA

Бренды по названию

Популярные бренды