Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
16 Appendix Device Configuration
70
Order number 2354913 | Edition 10/2022
EPG
SPRINT X
0
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
2.0
µA
P_01762
19
18
24
31
2. The parameter value is now shown by pressing the [Characteristic slope] button (31).
3. The LED display (19) shows [cor]. At the same time, the blue [Flushing] LED (18) will
flash.
4. All setting options can then be viewed, in turn, by turning the universal control dial
(24). The display shows:
4
[cor] for Corona manual and automatic guns
4
[tri] for Tribo manual and automatic guns
4
[aut] for automatic switching from Tribo to Corona, if the user frequently switches
between Tribo and Corona.
Limitation: A Corona gun is always shown when the control unit is switched on. A Tribo gun
is only recognized when the high voltage and powder feed are activated.
This setting is retained until the control unit is switched off.
EPG
SPRINT X
0
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
2.0
µA
P_05025
19
31
1. There are now two options:
4
If you want to keep the old setting, regardless of what is currently displayed, press
the [Characteristic slope] button (31) again. The LED display (19) shows C11 again.
