39
SuperFinish 23 Pro Select
EN
STARTUP
4
STARTUP
4.1
UNIT WITH SUCTION SYSTEM
1. Ensure that the sealing surfaces of the connections are
clean.
Ensure that the red inlet (1) is inserted in the coating ma-
terial inlet (4).
2. Use the enclosed 41 mm wrench to screw the union nut
(2) at the suction tube(3) onto the coating material inlet
(4) and tighten it.
3. Screw the union nut (5) at the return tube(6) to the con-
nection (7) (22mm).
4.3
HIGH PRESSURE HOSE AND SPRAY GUN
1. Screw the high pressure hose (9) onto the hose connec-
tion
2. Screw the spray gun (10) onto the high pressure hose
3. Tighten all union nuts on high pressure hose so that no
coating material can escape.
4. Screw the tip holder with the selected tip onto the spray
gun, align tip and tighten union nut.
When unscrewing the high pressure hose,
hold firmly on the hose connection with a
22mm wrench.
4.2
UNIT WITH UPPER HOPPER
1. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coat-
ing material inlet (4).
2. Screw the union nut (5) on the return pipe (6) onto the
connection (7).
3. Screw the upper hopper (8) onto the coating material in-
let (4).
4.4
CONNECTION TO THE MAINS NETWORK
Connection must always be carried out via
an appropriately grounded safety outlet with
residual-current-operated circuit-breaker.
Before connecting the unit to the mains supply, ensure that
the line voltage matches that specified on the unit’s rating
plate.
Press the inlet valve pusher before start up.
This ensures that the valve is not blocked or
clogged.
1
4
5
6
7
8
9
10
5
6
7
2
3
1
4
Содержание Brillux SUPER FINISH 23 PRO SELECT
Страница 86: ...86 SuperFinish 23 Pro Select FR ...
Страница 87: ...87 SuperFinish 23 Pro Select FR ...
