20
Airless Sprayer Plus
GB
g) This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.
4. Power tool use and care
a) Do not force the power tool. Use correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use.
Many accidents are caused
by poorly maintained power tools.
f) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed.
Use of the power tool for
operations different from those intended could result in
a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool
is maintained.
b) If the supply cord is damaged, it must be
replaced by the manufacturer or it’s service
agent or a similarly qualified person in order to
avoid a safety hazard.
Health protection
Danger
Caution! Wear breathing equipment: Paint
mist and solvent vapors are damaging to
health. Always wear breathing equipment
and only work in well ventilated rooms
or using supplementary ventilating
equipment. It is advisable to wear working
clothing, safety glasses, ear protection
and gloves
Flammable materials
Danger
Do not use the spray guns to spray
flammable substances.
Explosion protection
Danger
Do not use the unit in work places which
are covered to the explosion protection
regulations.
Danger of explosion and fire through
sources of flame during spraying work
Danger
There may be no sources of flame such
as, for example, open fires, smoking
of cigarettes, cigars or tobacco pipes,
sparks, glowing wires, hot surfaces, etc.
in the vicinity.
Electrostatic charging (formation of
sparks or flame)
Danger
Under certain circumstances, electrostatic
charging can occur on the unit due to
the rate of flow of the coating material
when spraying. On discharging this can
result in the emergence of sparks or fire.
It is therefore necessary that the unit is
always earthed through the electrical
installation. The connection must take
place through a correctly earthed two-
pole-and-earth socket outlet.
Ventilation
Good natural or artificial ventilation must be ensured in
order to avoid the risk of explosion or fire and damage to
health during spray work.
Secure device and spray gun
All hoses, fittings, and filter parts must be secured
before operating spray pump. Unsecured parts
can eject at great force or leak a high pressure fluid
stream causing severe injury.
Always secure the spray gun when mounting or
dismounting the nozzle and in case of interruption to
work.
Содержание Airless Sprayer Plus 0418
Страница 83: ...83 Airless Sprayer Plus...
