USER’S MANUAL — Please read before using this equipment.
© 2008 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
3
Ultra Compact Bluetooth Headset
By Wagan Tech
www.wagan.com
4
PAIR THE HEADSET WITH A COMPATIBLE PHONE
Before you can start using the headset, you must charge the battery and pair the
headset with a compatible phone.
1. Make sure your headset is turn off
Note: Parts of the headset are magnetic, metallic materials may he attracted to
the headset .Do not place credit cards or other magnetic storage media near the
headset, because information stored on them may be erased.
2. Push the answer key for 8 second until the blue and red light flashes
alternately
3. Activate the Bluetooth feature on the phone, and set the phone to search
for Bluetooth devices. See the user guide of your phone for instructions.
4. Select the headset (BH08) from the list of found devices.
CHARGER AND BATTERIES
5. Enter the pass code 0000 to pair and connect the headset to your phone. In
some phones you may need to make the connection separately after pairing.
See the user guide of your phone for details. You only need to pair the
headset with your phone once.
Check the model number of any charger before using it with this device. The
Bluetooth headset BH08 is intended for use with the chargers that is included in
the package.
6. If the pairing is successful, the headset's blue light will flash 3 times briefly
for the first time follow by a single flash every 7 seconds. The headset's name
appears in the phone menu where you can view the currently paired
Bluetooth devices.
CHARGE THE BATTERY
This device has an internal, non-removable, rechargeable battery. Do not
attempt to remove the battery from the device as you may damage the device.
DISCONNECT THE HEADSET FROM THE PHONE
1. Connect the charger cable to the headset.
2. Connect the charger to a wall outlet. The red indicator light is displayed
during charging. If charging does not start, disconnect the charger, pug it again,
and retry. Charging the battery fully may take up to 2 hours.
To disconnect the headset from your phone (for example, to connect the
phone to another Bluetooth device), do one of the following:
3. When the battery is fully charged, the red indicator light turns off. Disconnect
the charger from the wall outlet and the headset. The fully charged battery has
power for up to 3 hours of talk-time or up to 120 hours of standby time.
However, the talk and standby times may vary when used with different mobile
phones, products that use a Bluetooth connection, usage settings, usage styles,
and environments. When the battery is running out of power, the red indicator
light starts to flash.
•
Switch off the headset.
•
Disconnect the headset in the Bluetooth menu of your phone.
•
Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
RECONNECT THE PAIRED HEADSET TO YOUR PHONE
SWITCH THE HEADSET ON OR OFF
To switch on, press and hold the power key for 3 seconds. The blue indicator
light starts to flash. To switch off, press and hold the power key for 4 seconds
until headset beeps 2 times and the red indicator light is displayed briefly.
To connect the headset to your phone, switch on the headset, make the
connection in the Bluetooth menu of your phone, or press and hold the
answer/end key.
You can set your phone to connect with the headset automatically when the
headset is switched on. See the user guide of your phone for details.
