WAFER GSM-RELAY REMOTE CONTROL UNIT
http://www.waferlife.com
OUT6-OFFWSD6OFF
#PWD123456#OUT-REPLY-TEXT? (only for PC command)
OUT1-ON-REPLY-TEXT:WSD1ON OK
OUT1-OFF-REPLY-TEXT:WSD1OFF OK
OUT2-ON-REPLY-TEXT:WSD2ON OK
OUT2-OFF-REPLY-TEXT:WSD2OFF OK
OUT3-ON-REPLY-TEXT:WSD3ON OK
OUT3-OFF-REPLY-TEXT:WSD3OFF OK
OUT4-ON-REPLY-TEXT:WSD4ON OK
OUT4-OFF-REPLY-TEXT:WSD4OFF OK
OUT5-ON-REPLY-TEXT:WSD5ON OK
OUT5-OFF-REPLY-TEXT:WSD5OFF OK
OUT6-ON-REPLY-TEXT:WSD6ON OK
OUT6-OFF-REPLY-TEXT:WSD6OFF OK
PWD123456#RLY-TEXT? (only for PC command)
RLY1-TEXT:WSDRLY1
RLY1-REPLY-TEXT:WSDRLY1 OK
RLY2-TEXT:WSDRLY2
RLY2-REPLY-TEXT:WSDRLY2 OK
RLY3-TEXT:WSDRLY3
RLY3-REPLY-TEXT:WSDRLY3 OK
RLY4-TEXT:WSDRLY4
RLY4-REPLY-TEXT:WSDRLY4 OK
RLY5-TEXT:WSDRLY5
RLY5-REPLY-TEXT:WSDRLY5 OK
RLY6-TEXT:WSDRLY6
RLY6-REPLY-TEXT:WSDRLY6 OK
Data Log Check (Only for PC Connnecting , don’t send the SMS command for this)
With this command,we can check the inside config and control Log information
#PWD123456#LOG=ALL?
Reply would be as following data:
………
LOGS015:201501072143:18017370819:PHONE
LOGS016:201501072143:18017370819:PHONE
LOGS017:201501072141:18017370819:PHONE
LOGS018:2015018613564121668:WSDRLY2=13
LOGS019:2015018613564121668:WSDRLY6=6
LOGS020:2015018613564121668:RLY3=8
……….
……….
#ALARM Alarm setup
In GSM-RELAY6, that Alarm01 is very important position,not only act as a alarm number,but also working
