Waeco RPD190, Инструкция по установке и эксплуатации

Страница: 29 / 40

EN
RPD190, RPD218 Using the refrigerator
29
7.3 Dividing the interior space
You can divide the interior space of the refrigerator variably by arranging the
shelves and the door compartments according to your needs.
Removing and replacing the shelves
➤
Insert a flat bladed screw driver into the slot of the shelf locks and turn it
counter-clockwise (fig.
b , page 9).
➤
Remove the shelf locks from the wire shelf.
➤
Tilt the shelf to one side up.
➤
Remove the shelf by pulling it forward.
➤
Position the shelf in the desired location.
➤
Insert the ends of the shelf on the left (fig. c , page 9).
➤
Slide the shelf into the holes on the right (fig. c , page 9).
➤ Slide the plastic plugs into the holes in the wall (fig.
c
, page 9).
➤ Snap the shelf locks onto the shelf (fig. d , page 10).
7.4 Lower shelf stop wire
I
NOTE
A stop wire (fig. e 1, page 10) is fitted to the rear of the lower
shelf. The purpose is to prevent items from resting against the
rear interior liner which has a low ambient control heater fitted
behind the liner in this region.
The stop wire must remain fitted to the rear of the lower shelf at
all times.