Waeco PerfectView M7LS, Инструкция по установке и эксплуатации

Страница: 29 / 152

PerfectView M7LS
Technical description
EN
29
5 Technical description
5.1 Function description
The LCD monitor is a monitor which allows cameras (e. g. a rear view video camera) or
other video sources (e. g. a TV) to be connected. It is possible to switch back and forth
between video sources.
The monitor can be mounted on the dashboard, where it transmits the image from the
connected camera, allowing the driver to see the area behind the vehicle, e. g. when park-
ing.
The brightness of the monitor adapts automatically to the ambient light.
The buttons are illuminated and can therefore also be operated in the dark.
The mirrored picture function can be activated individually for each of the two video inputs.
The image then appears as if you were looking into the rear view mirror.
5.2 Operating elements
The following control elements are located on the monitor :
No. in
fig. d ,
page 8
Designation Description
1 Light sensor
2 C1/C2 Selects the camera or swaps menu page 1 and 2.
3 – Reduces the volume or other selected parameters
(brightness, contrast, colour tint).
4 MENU Switches to setup mode (see chapter “Using the
LCD-monitor” on page 35).
5 + Increases the volume or other selected parameters
(brightness, contrast, colour tint).
6 Switches the monitor on and off.
_M7LS.book Seite 29 Freitag, 14. Oktober 2011 5:32 17