Using the LCD monitor
PerfectView M5L, M7L, M7LX
34
Page 2:
– Language: “English” or “German”
– Reset (“Default”): Default setting for all parameters
– Camera1/Camera2: “Normal” or “Mirrored”
–
M7LX:
Camera3: “Normal” or “Mirrored”
–
M7LX:
Distance: Distance markers (chapter “Setting distance markers
(M7LX) (fig.
0
, page 5)” on page 35)
➤
Press the “–” button (
4
) or “+” button (
5
) to set the parameter of your choice.
➤
Press the “–” button (
4
) to
reduce
the value of the selected parameter.
➤
Press the “+” button (
5
) to
increase
the value of the selected parameter.
8.4
Setting the video source (fig.
0
, page 5)
I
NOTE
If you have connected the green cable to the reversing light and voltage is
present, reversing camera V1 is activated automatically (see chapter
“Using the monitor with two reversing cameras (trailer operation) (fig.
c
,
page 6)” on page 35).
M5L, M7L
➤
If you wish to switch to a different video source (from camera 1 to camera 2),
press the “C1/C2” button (
1
).
✓
The monitor switches from camera 1 to camera 2 or vice-versa.
M7LX
➤
If you would like to switch to a different video source, press the “C1/C2/C3”
button (
1
).
✓
The monitor changes the camera in the order “camera 1 – camera 2 –
camera 3”.
➤
If you wish the cameras to run
automatically
, press and hold the “C1/C2/C3”
button (
1
) for at least three seconds.
✓
The monitor display the “AUTO” mode.
✓
The monitor changes the cameras in the order “camera 1 – camera 2 –
camera 3” automatically in the preset time intervals.
No sound is available in this operating mode.
➤
If you wish to set the display time (2 s to 16 s):
Press the “–” button (
4
) to reduce the camera display time.
Press the “+” button (
5
) to increase the camera display time.
➤
To end the automatic function, press the “C1/C2/C3” button (
1
) again.
✓
The monitor displays the “MANUAL” mode.
_M5L_M7L_M7LX.book Seite 34 Donnerstag, 14. Januar 2010 3:03 15
