Waeco PerfectView CAM26W, Инструкция по установке и эксплуатации

Страница: 36 / 160

General safety and installation instructions
Do not open the equipment since this impairs the tightness and the operability (see A 7).
Do not pull at the cables since this could impair the tightness and the operability of the
components (see A 8.)
The product and its components are not suitable for the operation under water (see A 9).
Tools required
The following are required for the installation:
– Scale (ruler) (see B 1) – drilling machine (see B 5)
– prick punch (see B 2) – screwdriver (see B 6)
– hammer (see B 3) – screwdriver (see B 7)
– drill (see B 4)
The following are required for the electrical connection and the check:
– diode test lamp (see B 8) – heat shrink hose
– or voltmeter (see B 9) – hot-air drier (see B 11)
– crimp pliers (see B 10) – hatchet iron (see B 12)
– insulating tape – soldering tin (see B 13)
Subject to your individual assembly, you will probably need still more screws, nuts, was-
hers, metal screws and cable-clips than those contained in the scope of delivery for the
fastening of the camera and monitor.
Scope of delivery
No. Quantity Designation
1 1 Monitor-Kit RV-50-PAL (see C)
1.1 1 Monitor
1.2 1 Glaring protection
1.3 1 Monitor holder
1.4 2 Covering caps
1.5 1 Wiring harness
Assembly set: monitor
2 1 Kamera-Kit RV-26 (siehe C)
2.1 1 Camera
2.2 1 Camera holder
2.3 1 Camera protection
2.4 1 System cable 20 m
Assembly set: camera
Subject to technical changes!
36
Collected_RV-HD-Compact_Q4 30/06/03 11:00 Page 36