PerfectView
Scope of delivery
19
When the negative terminal of the battery is disconnected, all data stored in the volatile
memory will be lost.
z
The following data must be reset, depending on the vehicle equipment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the operating manual.
Observe the following instructions when working with electrical parts:
z
When testing the voltage in electrical cables, only use a diode test lamp (fig.
1
1,
page 3) or a voltmeter (fig.
1
2, page 3).
Test lamps with an illuminant (fig.
1
3, page 3) take up voltages which are too high
and which can damage the vehicle's electronic system.
z
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid through sharp-edged ducts without protection (fig.
2
, page 3).
z
Insulate all connections.
z
Protect the cables from mechanical wear (for example rubbing against existing cables)
using cable binders or insulating tape.
3
Scope of delivery
4
Accessories
No. in
fig.
3
, page 4
Quantity Designation
Item no.
1
1
Video splitter
9102200011
2
1
Connection cable for vehicle electrics
3
1
Switch for manually activating the cameras
4
1
Connecting cables for video splitter –
monitor
–
1
Installation material
Designation
Item no.
Connection cable for RV-59-HD monitor
9102200012
_VS200.book Seite 19 Donnerstag, 19. März 2009 2:22 14
