MagicTouch MT2000
Scope of delivery
19
When the negative terminal of the battery is disconnected, all data stored in the
volatile memory will be lost.
z
The following data must be set again, depending on the vehicle equipment
options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the vehicle’s operating
manual.
Observe the following installation instructions:
z
Secure the parts installed in the vehicle in such a way that they cannot become
loose under any circumstances (sudden braking, accidents) and cause
injuries
to the occupants
of the vehicle.
z
To prevent damage when drilling, make sure there is sufficient space on the
other side for the drill head to come out (fig.
1
, page 3).
Observe the following instructions when working with electrical parts:
z
Only use a diode test lamp or voltmeter to test voltages in electric cables.
Test lamps with a bulb consume too much voltage, which can damage the
vehicle’s electronic system.
z
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid through sharp-edged ducts without protection (fig.
2
,
page 3).
z
Insulate all connections.
z
Protect the cables from mechanical wear (for example rubbing against existing
cables) using cable binders or insulating tape.
3
Scope of delivery
Quantity
Description
Item number
1
Comfort indicator module
MT-2000
2
Connection cable
3
Diode
Fastening material
MT-2000.book Seite 19 Montag, 13. Februar 2006 4:41 16
