Waeco Magic Watch MWE-850-4DSM, Инструкция по установке и эксплуатации

Страница: 37 / 204

magic watch Installing MAGIC WATCH
37
The sensor is preset to have a vertical installation angle of
approxi5°. This means that the cover ring is thicker at the bot-
tom.
Note that the sensors must be aligned in a particular direction. The top of
the sensor is marked with a
▼
(see fig. 12.1, page 6).
z Fit the sensors at regular intervals along the total width of the vehicle in
order to guarantee the optimum monitoring.
z The sensors may be painted but not with a multiple-coat paint as this
impairs their functionality.
The installation procedure is as follows:
➤
Choose an installation location on the bumper which is as perpendicular
to the road surface as possible (see fig. 12, page 6).
z If the sensor cable is not long enough, you can order one-metre extension
cables (MWCD-1) as accessories.
Caution!
Before making any drill holes, ensure that no electrical cables or
other parts of the vehicle can be damaged by drilling, sawing and
filing.
➤
For each sensor, drill a hole with a diameter of 22 mm in the bumper.
➤
For a more accurate fit, slant the drill downwards slightly when drilling the
hole on the inside of the bumper. The sensor cover can now be easily
inserted at a downward angle.
➤
Guide the cables of the sensors through the corresponding hole.
➤
Insert each sensor into the corresponding drill hole until it latches into
place.
MWE-850-4DSM.book Seite 37 Donnerstag, 7. Juli 2005 2:39 14