Installing MAGIC WATCH
magic watch
40
6.4
Fastening the control electronics
Note the following information when selecting a place to fit the control elec-
tronics:
z
Note the length of the sensor cables.
z
The control electronics may not be damaged if you have luggage or
objects in the boot.
➤
Fasten the control electronics to a suitable place in the boot.
The control electronics should not be exposed to any moisture.
The polarity of the socket cannot be reversed: They can be only
be plugged into the connection in one way.
➤
Plug the cable sensor's sockets into the connections on the control elec-
tronics (see fig. 15 B, page 8).
Make sure the locking pin catches.
6.5
Fastening the display
Note the following information when selecting a place to fit the display:
z
Note the length of the display cable.
Note that the boot cover swings upwards on vehicles that have a big tail-
gate.
z
The display must be easily visible when you are reversing.
z
The display must not be covered or damaged by any objects placed on
the boot cover.
z
Fit the display so that there is no danger of injury, for example when
sharply braking.
z
Its compact design means it can be fitted in many places in the vehicle.
MWE-150-2DIS.book Seite 40 Mittwoch, 29. Juni 2005 5:20 17