Waeco MAGIC Control MTPM-100, Инструкция по установке и эксплуатации

Страница: 62 / 328

Electrical connections MAGIC CONTROL
62
8.4 Earthing cables
This is how to connect a cable to earth:
➤
Strip 5 mm of the cable ( x A, page 12).
➤
Use a claw cable terminal 6 mm in diameter and a crimp connection
(
x B, page 12).
➤
Use a crimping tool to crimp the cable terminal to the end of the cable
(
x C, page 12).
➤
Screw the cable terminal to an original earth point ( x D, page 12).
8.5 Attaching a flat plug to the cable
➤
Strip 5 mm of the cable ( y A, page 12).
➤
Use a suitable plug with a crimp connection (e. g. a tab sleeve)
(
y B, page 12).
➤
Use a crimping tool to crimp the cable terminal to the end of the cable
(
y C, page 12).
➤
If necessary, use a plug connector with an insulating sleeve ( y D, page 12).
8.6 Connecting the power supply
➤
Connect the black cable to earth (terminal 31).
➤
Connect the orange cable to a switched power supply (terminal 15).
Make sure the voltage does not drop when the engine is started.
➤
Insert the plug of the orange and black cable into the socket of the
controller (
6 2, page 5).
➤
Connect the red cable to a cable with a per12 V charge
(terminal 30).
8.7 Connecting the display
➤
Insert the plug of the display cable into the display socket on the controller
(
6 3, page 5).
MTPM-100.book Seite 62 Freitag, 15. Juli 2005 4:37 16