Waeco MAGIC Control MTPM-100, Инструкция по установке и эксплуатации

Страница: 50 / 328

Safety and installation instructions MAGIC CONTROL
50
z When connecting to supply line 31 (earth), screw the cable
– To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw
Ensure that there is a good earth connection.
When the negative terminal of the battery is disconnected, all data stored in
the volatile memory will be lost.
z The following data must be set again, depending on the vehicle
equipment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Observe the following installation instructions:
Caution
The sensor may only be fitted by a qualified workshop.
z Secure the parts of the MAGIC CONTROL system installed in the vehicle
in such a way that they cannot become loose under any circumstances
(sudden braking, accidents) and cause
injuries to the occupants of
the vehicle.
z To prevent damage, when drilling ensure that there is sufficient room for
the drill head to emerge once the hole has been made (
2 , page 4).
z Deburr all drill holes and treat them with a rust-protection agent.
MTPM-100.book Seite 50 Freitag, 15. Juli 2005 4:37 16