Waeco CoolAir CA-800-Mercedes-2, Руководство по установке

Страница: 33 / 148

33
Installation CoolAir
➤
Use the buttons + or - (see fig. 7 on page 5, Pos. 6 and 7) to select the
operating mode with which the system starts.
➤
Press the operating mode button (see fig. 7 on page 5, Pos. 4) to
confirm your entry.
✓
The set value is saved and is then used when the system is restarted.
✓
You are now in menu level 3 and can use the + and - buttons to switch
between menu levels.
6.3.5 Menu level 4: Default setting
You can return the parameters you set in configuration mode on menu le-
vels 1 to 3 to the default settings:
➤
Start configuration mode (see chapter "Start and end configuration
mode" on page 30).
✓
The first digit of the display (see fig. 7 on page 5, Pos. 5) shows the
menu level and the second and third show the parameter which can
be set.
➤
Press the + button (see fig. 7 on page 5, 6) three times to switch to
menu level 4 .
✓
The digital display shows
--
.
➤
Press the operating mode button (see fig. 7 on page 5, Pos. 4) to re-
turn the system to its default settings.
✓
The digits in the display
--
flash.
➤
Press the + button.
✓
The digital display shows
00
.
➤
Press the operating mode button (see fig. 7 on page 5, Pos. 4) to
confirm your entry.
✓
The parameters set in configuration mode are returned to the default
setting.
✓
You are now in menu level 4 and can use the + and - buttons to switch
between menu levels.
ID number Operating mode
0
Automatic mode
1
Operating mode 1
2
Operating mode 2
3
Operating mode 3
CA-800-Install.book Seite 33 Mittwoch, 20. Februar 2008 12:28 12