Waeco AirCon Service Center ASC 5300 G, Руководство по эксплуатации

Страница: 113 / 336

EN
113
ASC 5300 G Service tasks
“Service completed” displays the amount of service work performed
using the air conditioning service unit since the last reset (see date).
9.5 Calibrating the pressure transducer
I
1. In the basic menu, use the cursor keys

or

to select “Other
selections” :
2. Depressurise the unit (as described in chapter “Changing the dryer
filter” on page 110).
3. Press ENTER to confirm.
4. Use the cursor keys  or  to select “Service” :
5. Press ENTER to confirm.
6. Enter the password “2224” .
7. Confirm “Pressure transducer” by pressing ENTER .
8. Then follow the instructions in the display.
– Unscrew the service couplings ( 12 ) and ( 13 ) from the service
hoses ( 10 ) and ( 11 ).
– Use the keypad ( 7 ) to enter the current local atmospheric pressure
and press ENTER to confirm.
Service completed:
08/03/15
Number 4
STOP-EXIT
NOTE
The pressure transducer has to be correctly calibrated in order to make
accurate pressure measurements.
Calibration is required:

Every four weeks
 If the AirConServiceCenter has been subjected to heavy shaking
 Every time the vacuum pump oil is changed

If the display shows implausible pressure readings
Short selection
Free selection
Other selections
ENTER-OK
Int. vessel filling
Flushing
Reset scales.
Service.
ASC5300G_OPM_DE-EN-ES-FR-RU.book Seite 113 Freitag, 26. Juni 2020 5:42 17