Installing and connecting the MT200
MagicTouch MT200 VW10
12
Skoda Octavia
Activation of the vehicle's indicators is conducted in the cable strand on the steering
column (fig.
5
, page 3).
➤
Lay the black/white cable and the black/green cable of the radio remote control
along the original cable strand to the steering column.
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the black/white cable to the black/white cable (
sw/ws
) in the cable
strand on the steering column
– Connect the black/green cable to the black/green cable (
sw/gn
) in the cable
strand on the steering column
Skoda Fabia and VW Polo
Activation of the vehicle's indicators is conducted on the power distribution box un-
derneath the dashboard on the driver's side (fig.
2
, page 2).
➤
Lay the black/white cable and the black/green cable of the radio remote control
along the original cable strand to the steering column.
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the black/white cable to the black/white cable (
sw/ws
) in the cable
strand on the steering column
– Connect the black/green cable to the black/green cable (
sw/gn
) in the cable
strand on the steering column
2.4
Completing installation
➤
Reattach the strap on the negative terminal of the vehicle battery again.
➤
Test the radio remote control to see if it works correctly.
➤
Fasten the control device in place using the fastening material supplied.
➤
Remount the panels and covers removed.
_MT200_VW10.book Seite 12 Montag, 19. April 2010 7:32 19
