Wadia 7, Инструкция по эксплуатации и информации

Страница: 17 / 22

Wadia 7 CD TRANSPORT
BASIC OPERATION
To load a Compact Disc for play press the OPEN / CLOSE button on either the front of the
product or on the remote control. Place the Compact Disc into the drawer, label side up.
Close the drawer by pressing the OPEN / CLOSE button again. In a few seconds the Display
will show the total number of tracks on the disc and their total playing time. The disc is now
ready for play.
DISC PRECAUTIONS
Do NOT use a CD stabilizer, It will jam the disc clamping system.
AC POWER CONNECTION
DOUBLE CHECK PROPER VOLTAGE OPERATION
Connect the linecord supplied with the system first to the Wadia
7 Power Supply and
then to the service outlet.
Unplug the unit immediately if it becomes wet.
CARE AND MAINTENANCE
To clean the Wadia 7 Compact Disc Transport, use a soft cloth moistened with plain water.
Don’t apply water, dusting sprays, solvents, abrasives, or cleaning fluids directly to the
chassis. Make sure that the remote sensor window on the front of the product and the remote
control’s projection lens are kept clean and dust free. When the remote control’s batteries
need to be replaced, always replace both batteries at the same time. Always dispose of
batteries in a manner that is considerate of the environment.
SERVICE
If you have a service problem, immediately contact your Wadia dealer. It is important that
your Wadia 7 Compact Disc Transport be serviced only by an authorized Wadia service
facility.This will ensure that proper repairs are made and that your Wadia
7 warranty stays in
effect throughout the warranty period.
17