Wadia 7, Инструкция по эксплуатации и информации

Страница: 11 / 22

Wadia 7 CD TRANSPORT
PROGRAM: Pressing this button enters all tracks subsequently chosen with the numeric
keys (up to a total of 40 selections) as part of a programmed sequence, for playback in any
desired order.
Programming a sequence of tracks can be done either in the STOP mode or in the PLAY
mode.
To program a sequence of tracks from a compact disc while in the STOP mode, first press
the PROGRAM Button. The PROGRAM indicator will illuminate in the display window. Next,
press the numeric buttons of the tracks you would like to program in the sequence desired.
The number of each selected track will be indicated under the TRACK indicator, the location
of that track within the program (the playing order) of the tracks selected will be indicated in
the area where INDEX is usually identified, and the total program playback time of the
sequence will be updated as each track is programmed.
To program a sequence of tracks from a compact disc while in the PLAY mode, the
procedure is the same. The only difference is that the total program’s playback time will not
be displayed.
NOTES:
A program will continue to be held in memory, even after that program has been completely
played.
When programmed playback is ended by pressing the STOP button, the program will
continue to be held in memory. However, if the STOP button is pressed a second time, the
PROGRAM indicator on the display will go out and the programmed contents will be erased
from memory.
After programming, pressing the PROGRAM button again or pressing the STOP button, prior
to beginning playback, will erase the programmed contents from memory.DELETE: This
button is the opposite of normal programming. Pressing this button while a program is being
entered, erases the entire entered program. To play an entire disc, except for specific tracks
that you do not want to hear, press this button and then the numeric keys corresponding to
the tracks you would like to delete (up to a total of 40 selections).
SINGLE: To play a single track, press the SINGLE button (the SINGLE indicator will light in
the display window), then press the numeric button(s) which correspond(s) to the track you
would like to play. The transport will search for the selected track, and playback will start
from the beginning of that track. At the conclusion of the track, the transport will enter the
STOP mode.
To repeat one single track, press the SINGLE button (the SINGLE indicator will illuminate in
the display window), then press the REPEAT button (the REPEAT indicator will illuminate in
the display window), and then press the numeric button(s) which correspond(s) to the track
you would like to repeat. Playback of the track selected will begin immediately. At the
conclusion of the track the transport will return to the beginning of that track again, and in this
way the selected track will be repeated.
CLEAR: When the PROGRAM indicator is illuminated in the display window, to eliminate a
particular track from a programmed sequence, first press the CHECK button until the track
which you would like to eliminate is selected. Then press the CLEAR button which will clear
that particular track from memory.
11