8
9
You can use the machine to cut without a comb or you can use one of the 3 combs with 1, 2 and 3 mm sizes.
To adjust the hair size, just select the right comb.
Cutting with 4 measures
3 mm
2 mm
1 mm
Removal of the blades:
Removal and installation of the blades
Remove the screws with a screwdriver;
loosen and remove the cutting head.
To prevent the blades from falling, use the
other hand to hold them.
1
2
Use of the cutting machine
Before using the machine, put a few drops of
lubricating oil on the blades.
1
Press the power button to start the blades.
2
Pass the machine over the desired cutting area.
3
Press the off button when you have finished
the job.
4
Adjusting the blades and combs
To dismantle the combs:
·
Simply pull the comb tightly from point (2).
To install the combs:
·
Align the edge of the comb with the edge of the blade (1) and push
forward slightly to assemble (2).
In both cases always make sure that the machine is switched off.
1
2
