Customizing
Page 32
The basic process for working with the OSD is as follows:
•
Press the M
ENU
button to
open the OSD main menu.
•
Press the up or down
buttons to toggle between
the main menu icons.
Then press the E
NTER
button to choose the
highlighted icon.
The Main Control icon displays a DVI or VGA identifier,
depending on which video interface is currently in use.
•
Press the up or down
buttons to toggle between
menu options. Press the
E
NTER
button to choose
the highlighted option.
Note that some options,
such as P
OSITION
, are not
available when in DVI
mode.
•
Press the up or down buttons to select a setting for
adjustment. Press the E
NTER
button to choose the
highlighted setting.
Note that some settings may not be available when
in DVI mode.
•
Use the up or down buttons to increase or
decrease the setting value.
•
Press the M
ENU
button to accept your changes.
Note:
After changing a setting, the OSD menu will
automatically close after a few moments of
inactivity. You can also continue to press M
ENU
in
order to back out of the OSD menu. All settings
are automatically saved when the OSD menu
closes. If you make changes to the display
appearance and cannot return to the original
settings, go to the R
ESET
menu and select the
F
ACTORY
R
ESET
option to return Cintiq to its
original factory defaults.
See the following pages for details about the OSD
menu options.
12WX_Manual.fm Page 32 Thursday, September 20, 2007 3:49 PM