background image

Prevent your children from swallowing the pen nib or side switch 
knob.

 The pen nib or side switch knob may accidentally be pulled out if 

children are biting on them.

CAUTION

When adjusting the tilt angle of DTU-710, be careful to avoid 
catching your finger in the gap of the movable portion of the stand.

If the LCD screen has been damaged, DO NOT touch any liquid 
that may be leaking from it; 

this liquid is an irritant.  In case of contact 

with skin, eyes, or mouth, rinse immediately with running water for at 

least 15 minutes or more.  If contact is made with the eyes or mouth, 

also consult a physician.

WARNING

Do not use DTU-710 Interactive Pen Display in a facility control 
system that requires extremely high reliability;

 

it may cause other 

electronic devices to malfunction, or other devices may cause DTU-710 to 

malfunction.  

Where use is prohibited, power off DTU-710 to prevent the possibility of it 

causing other electronic devices to malfunction.  Wacom does not accept 

any liability for direct or consequential damages.  For details, please refer 

to your Warranty, located at the inside back cover of this manual.

Do not open DTU-710. It has the risk of electric shock.

HIGH VOLTAGE

Only use the AC adaptor that came with DTU-710.

 If a different type 

of AC adaptor is used, DTU-710 will not work properly or it may be 

damaged.

 Using a different type of AC adaptor also has the potential 

to result in fire.

 Use of a different AC adaptor will void your warranty.

SAFETY INSTRUCTIONS

Be sure to use a grounded power source when applying power to 
DTU-710.

I

NTERACTIVE PEN DISPLAY

DTU-710

DTU-710_EN.indd   1

04.7.20   8:31:30 PM

Содержание DTU-710


























Отзывы: