WACO VC1803, Руководство пользователя

Страница: 10 / 38

Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any
maintenance on the unit.
Clean or Replace Filter — Refer to Operating Instructions Clean Filter section.
Cleaning the Unit Housing
1) Keep the unit from being exposed directly to the sun to prevent colour fading and deterioration.
2) Clean the surface with a damp cloth and dry it with a soft towel.
Storing the unit for an extended period of time or transporting the unit
1) Clean or replace filter — refer to operating instructions.
2) Unplug the unit.
3) Empty any excess water.
4) The unit should be stored in a cool dry place when not used.
Clean filter
If the filter is dirty, air circulation is compromised and the efficiency of the dehumidifying decreases. It is therefore
good practice to clean the filter at regular intervals. The frequency depends on the duration and conditions of
operation.
If the unit is used constantly or systematically, you are recommended to clean the filter once a week.
The filter is housed in the intake grille as below.
Use a vacuum cleaner to remove dust accumulations from the filter. If it is very dirty, immerse in warm water and
rinse a number of times. The water should never be hotter than 40°C. After washing, leave the filter to dry then
attach the intake grille to the unit.